615-431-3789Architecture, planning & interiors
Nashville & Middle Tennessee
Select Page
A pale materials library wall with samples of charred cedar, brick slips, board-formed concrete, zinc, terrazzo, oak and glass above a long shelf of small white scale models of buildings, no people.

Glossary

Architecture Glossary: Plain-English Terms

Words you will hear when someone talks about designing and building, explained simply.

Call us today615-431-3789
Architect
A design professional who plans buildings and prepares the drawings used to permit and build them.
Program
The list of rooms, sizes and uses a building must hold.
Schematic design
The first design phase, when ideas, plans and massing are tested.
Design development
The phase that fixes materials, structure and systems.
Construction documents
The detailed drawings and notes builders use to price and build.
Specifications
Written descriptions of materials and methods for a project.
Permit set
The drawings submitted to the building office for approval.
Plan review
A check of drawings by the building authority before a permit is issued.
Zoning
Local rules about how land can be used and built on.
Setback
The required distance between a building and a lot line.
Lot coverage
The share of a lot that buildings may cover.
Overlay district
An extra set of zoning rules, often for historic or design character.
Variance
Permission to depart from a zoning rule, granted by a board.
Easement
A right for others to use part of a property, such as for utilities.
Survey
A measured drawing of a property showing its boundaries and features.
Topography
The shape of the land, shown with contour lines.
Site plan
A drawing showing buildings, drives, trees and other features on a lot.
Massing
The overall three-dimensional shape and size of a building.
Elevation
A drawing of one face of a building seen straight on.
Section
A drawing that slices through a building to show its inside.
Floor plan
A drawing of a building level seen from above.
Detail drawing
A close-up drawing that shows how parts fit together.
Schedule
A table in the drawings listing doors, windows, finishes or fixtures.
Scale
The ratio between a drawing and the real building.
As-built drawings
Drawings that show a building as it was actually built.
Measured drawings
Drawings made by measuring an existing building.
BIM
Building information modeling, a digital model that keeps drawings coordinated.
Rendering
A realistic image of a building that has not been built yet.
Model
A physical or digital version of a building used to study it.
Structural engineer
An engineer who designs the frame and foundations of a building.
MEP
Mechanical, electrical and plumbing, the systems inside a building.
Civil engineer
An engineer who designs drainage, grading and site utilities.
Geotechnical report
A study of the soil that guides foundation design.
Foundation
The part of a building that carries its weight to the ground.
Footing
The wide base of a foundation that spreads the load.
Slab-on-grade
A concrete floor poured directly on prepared ground.
Crawl space
A shallow space under a floor that gives access to pipes and wires.
Framing
The skeleton of a building, usually in wood or steel.
Header
A beam that carries the load over an opening.
Load-bearing wall
A wall that carries the weight of the structure above.
Cantilever
A part of a building that projects beyond its support.
Truss
A triangulated frame that spans a space, often used for roofs.
Envelope
The outer shell of a building: walls, roof, windows and doors.
Insulation
Material that slows heat moving through the envelope.
Air barrier
A layer that stops air leaking through the envelope.
Vapor barrier
A layer that slows moisture moving through a wall.
Flashing
Thin metal or membrane that directs water away from joints.
Cladding
The outer covering of a wall.
Standing seam
A metal roof system with raised seams that run from ridge to eave.
Overhang
The part of a roof that extends past the wall.
Clerestory
A band of high windows that brings light deep into a room.
Fenestration
The windows and doors of a building.
Glazing
The glass in a window, or the act of fitting glass.
Daylighting
Designing a building to use natural light.
Orientation
The direction a building faces relative to the sun.
Passive solar
Using the sun’s heat and light through building design.
Thermal bridge
A path where heat bypasses the insulation.
Egress
A safe way out of a building or a room.
Fire separation
A wall or floor built to slow the spread of fire.
Occupancy
The use a building is designed for, which sets many code rules.
Accessibility
Designing buildings so everyone can enter and use them.
ADA
The Americans with Disabilities Act, which sets accessibility rules for many buildings.
Adaptive reuse
Giving an older building a new use.
Historic review
A process where a board checks changes to historic buildings.
Infill
New building on a vacant or underused lot in an existing area.
Mixed-use
A building that combines uses, such as shops below and homes above.
Accessory dwelling unit
A small second home on the same lot as a main house.
Tenant improvement
Work done to adapt a leased space for a tenant.
Shell and core
The base structure, envelope and common systems of a commercial building.
Addition
New space added to an existing building.
Built-in
Furniture or storage built permanently into a building.
Millwork
Finished woodwork such as trim, doors and cabinets.
Submittal
A product sample or drawing a builder sends for the architect to review.
Request for information
A written question from a builder about the drawings.
Change order
A written change to the scope, cost or schedule of construction.
Allowance
A set amount for items not yet chosen at bidding.
Punch list
A final list of small items to finish or fix.
Substantial completion
The point when a building can be used as intended.
Design-build
A delivery method where one team handles design and construction.
Design-bid-build
A delivery method where design is finished before builders bid.
Owner’s representative
A professional who manages a project on the owner’s behalf.
Certificate of occupancy
A document from the building office that allows a building to be used.

Good to Know

Your Questions

Still have a question?

Call 615-431-3789

Do I need existing drawings to start?

No. If you have plans, a survey or photographs they help, and if you do not, we can measure an existing building and coordinate a survey for a new lot.

Can you design homes, offices and restaurants?

Yes. Our work includes custom homes, additions and renovations, townhomes, mixed-use buildings, offices, restaurants, shops, medical offices, churches and light-industrial buildings.

Will I see more than one design option?

Usually. We sketch a few clear directions in schematic design, talk through what each means and refine the one that feels right.

Request a Consultation

Start a Conversation

Tell us about the lot or the building, what you would like to design and when you would like to begin. We reply promptly and treat every inquiry with care. Prefer to talk? Call 615-431-3789.

Call us today615-431-3789

Request a Consultation